Scrape off all the traces of dirt and old gasket from the engine and sump flanges with a paint scraper.
In recent research, MWCNTs and carbon black were mixed with the butadiene/natural rubber to form a hybrid composite which gives very strong filler links by partial replacement of carbon black based on the m1:m2:X (m1—MWCNT; m2—reduction amount of carbon black; X-varies from 1 to 6) [40,64]. An internal blending mixer and two-roll milling were used to formulate the composites. The synergistic effect plays a major role in improving the abrasion resistance property due to the partial replacement of carbon black by adding MWCNTs in different ratios. The optimal ratio value of MWCNTs is 5 (parts per hundred of rubber) and 27.5 (parts per hundred of rubber) for carbon black with better resistant to abrasion compared to the matrix material [64]. The vulcanized hybrid composite material reinforced with MWCNT/carbon black at the ratio of 1:1 shows better mechanical properties, curing characteristics, and thermal conductivity. This shows a better tyre thread with an improved endurance life, less curing time, and improved thermal conductivity [42,64]. Fig. 4.4 shows the SEM and TEM images of uncured and cured rubber and Figs. 4.5 and 4.6 show the application of rubber nanocomposites in a tyre application.
When installed, the oil seal’s flexible lip is placed against the rotating shaft, and the casing is pushed into the housing for support. It is crucial that the sealing lip is lubricated to avoid overheating caused by friction.
The other way oil seals work is by stopping outboard materials that can damage the machine or contaminate its lubricant. The outboard materials that the oil seal will need to stop depend on the application. However, the most common kinds are dirt, moisture, and the particles produced during manufacturing.
MVQ