When it comes to replacing spark plugs in your car, cost is always a factor to consider. New spark plugs can vary in price depending on the brand, material, and quality. It is important to understand the factors that contribute to the cost of spark plugs in order to make an informed decision.
Installation tips for oil seals
These oil seals are the best for applications involving high temperatures. It’s suitable for temperatures between -4 degrees Fahrenheit and 392 degrees Fahrenheit. Also, it’s highly resistant to acids, dissolvent materials, and other chemicals. Viton (FKM/FPM) oil seals can run at a maximum speed of 38 m/s.
The sealing lip is always made of a rubber or synthetic material. For oil seals with a rubber outer case (R, RST, GR, GRST), the rubber quality of the sealing lip and the outer case are the same.
The range of uses of peroxydically cross-linked EPDM includes in hot water and steam seals. EPDM is also very resistant to ageing and ozone. Compared with the usual types of synthesis natural rubber it has good resistance to cold temperatures. EPDM is not resistant to aliphatic or aromatic hydrocarbons or mineral oil products. Resistance to chemicals, and also to oxidising agents, is very good. Temperature range from -50 °C to +140 °C depending on type.
All are fitted with a spring to preload the sealing lip. All these types are for non-pressurised or low-pressure applications up to 0.5 bar for diameters of a limited size. For diameter of 500 mm or more, the maximum pressure is 0.1 bar. For higher pressures, special types or PTFE lip seals can be used.
Oil Seals From Global O-Ring and Seal
Rubber type
