- Iridium spark plugs are a key component in keeping your car running smoothly and efficiently. These high-performance spark plugs are designed to provide a more consistent and efficient spark, resulting in improved engine performance and fuel efficiency.
- The selection of the right high pressure oil seal is critical
- The design and material composition of an oil seal are crucial factors in determining its performance and durability. The seal must be designed to withstand the high pressures and temperatures that can occur within the machine, as well as the abrasive and corrosive substances that may come into contact with it. Common materials used in oil seals include rubber,PTFE, and synthetic materials, each with its own unique properties and applications.

Out of all of the elastomers, silicone offers you the widest range of working temperature ranges. Renowned for its flexibility and low compression set capabilities, silicone is the optimal choice for o rings and other moulded seals.

Refit the distributor, ensuring that the rotor arm is exactly in line with the first mark. If not, withdraw the distributor and try again.
Auto Oil Seal:

1) Common seal types and their features


Main lip The main lip is the most critical component of the seal.
The basic principle of sealing is straightforward – the flexible lip is held against the rotating part (usually the shaft) whilst the casing (or O.D.) is pressed into the housing or bore and holds the seal in place. The sealing lip needs some form of lubrication to avoid overheating and is usually energized by means of a garter spring.
Apply gasket sealant to the engine flange and refit the cover. Tighten the fixings but do not overtighten them.
Always start by making sure the oil seal is facing the right direction. The oil seal must be positioned with its spring to the side of the medium to be sealed. The oil seal must then be pressed into the bore. It must fit tightly (H8 in the groove is recommended). Use appropriate tools for this, such as an impact socket set, to ensure that the force is applied evenly during pressing. The oil seal must never be hammered into the bore with brute force, but eased in.