O-Rings
Furthermore, neoprene foam gaskets offer superior insulation properties
. The foam material has a low thermal conductivity, which helps to reduce heat transfer and maintain temperature control in applications where thermal insulation is critical. This makes neoprene foam gaskets suitable for use in HVAC systems, refrigeration units, and other applications where thermal management is essential.neoprene foam gasket

The primary function of a shaft oil seal is to retain lubricating fluids within the system while preventing the ingress of external contaminants. This is particularly important in high-speed applications where the loss of lubricant or the entry of contaminants could lead to rapid wear and damage to the equipment.
What is an oil seal and how does it work?
Figure 2: Typically shaped oil seal and component nomenclature
Most standard oil seals have to comply with the DIN 3760 and ISO 6194 standards. Different standard types of oil seals are available that comply with these requirements.
NBR rubber is above all resistant to oils, especially hydraulic oils, lubricants, petrol and other aliphatic hydrocarbons, diluted acids and lyes. Good physical values such as high friction resistance and ruggedness and good temperature resistance (-25 °C up to +120 °C, in part to -40 °C) give this natural rubber a wide range of uses.
For the housing stop installation technique, set the seal depth flush with the bore’s interior shoulder. This technique ensures that the seal is perfectly aligned with internal housing components. A depth gauge can be crucial here to confirm that the seal is positioned correctly.
(2) When the ambient temperature is high, polyacrylate or silicon, fluorine, and silicon fluorine rubber should be selected. And should try to lower the oil temperature in the tank. When the operating temperature is too low, cold-resistant rubber should be used.