

Metal inserts must be carefully prepared in operations involving cleaning and roughening surfaces (grit-blasting or phosphatizing), stamping out parts, application of primer (usually by dipping), and curing of the primer (often by baking for a short time at moderate temperature).3 Primer curing minimizes the possibility of wiping primer off portions of the insert by stock flow during molding. The treated metal inserts must be used within a relatively short time (usually a day or less), so that functionality necessary for bonding is not lost by reaction with moisture in the air. Freshness of the primer surface is particularly important for peroxide-cured and base-resistant fluoroelastomer compounds. Compound formulation should be adjusted to attain good adhesion.
Figure 6: Recommended housing bore chamfers (shouldered bore)
single and double lip
3. Fluid types: Oil seals interact with oils, fuels, grease, water, and more. Choosing a seal material that is most compatible with your chosen medium can help to increase the durability of the seal and its internal components.
0.1 to 0.32 μmRa and 0.8 to 2.5 μmRz
and the lead angle to no greater than 0.05°. (There is a risk that the lead marks will impede the sealing performance of the oil seal: see Figure 5.)