In addition to its excellent temperature resistance, it is also resistant to ozone, light, and weather conditions. Silicone can be typically found in the food and medical industry as well as in hydraulics and pneumatics. It is often the preferred material for o-rings, moulded parts and flat seals but is also commonly used for electric insulators due to the material’s translucency and flexibility.
Lubricant

Oil Seal Installation Guide
There is a British Standard laid down for the control of synthetic rubbers. BS 3574 (1989) helps to determine shelf life – for instance, Nitrile (NBR) and Polyacrylic (ACM) are Group ‘B’ rubbers and have a 7-year life, whilst Silicone (VMQ) and Fluoroelastomers (Viton®) are Group ‘C’ rubbers and have a 10-year shelf life. PTFE and Leather do not come into this category but like the others should be kept in the original packing for as long as possible away from direct light, dust, and humidity. Ozone, which can also be produced by battery-driven forklift trucks has a very bad effect on synthetic rubbers. Finally, protect the sealing lip – DO NOT hang the seals on nails, wire etc.
The oil seal would seal one face against a rotating member and the other face to a stationary housing. It would prevent dirt from coming between the hub or shaft and the seal.


Finding oil spots under a parked vehicle can be both worrying and stressful for any vehicle owner. If the seal’s leak is small, oil may start to accumulate on the underside of the engine. But as the leak gets bigger, the oil leak will become visible in the front side of the engine.
What are bearing isolators?
Standard 3760/3761